Ausziehhülsen für HM 3052, HMV 52 E, 260 x 240 x 116mm, Innen ø 220mm

Typ = Lagerabziehhülsen
Innendurchmesser = 220mm
Abmessungen = 260 x 240 x 116mm
Zur Verwendung mit = HM 3052, HMV 52 E.

SKF Bearing Withdrawal Sleeves - AOH 304 Use this hydraulic withdrawal sleeve from SKF to mount and dismount a bearing from the cylindrical seat of a stepped shaft. Simply push it into the bore of the bearing to reduce the clearance from the shaft and achieve a tight fit. The sleeve features a duct with G 1/4 thread for oil injection, which virtually eliminates friction and makes dismounting easy. It has a bore diameter of 220 mm, with a small taper to an outside diameter of 240 mm for easy fitting to standard equipment.• Coated with a solvent-free rust inhibitor to prolong the life of the product • Oil injection method makes lubrication easy • Bearing can be mounted at any point on the shaft Application information • Automotive workshops • Rotating industrial machinery • Wind turbine industryDie SKF-Auszugshülsen, die zur Anpassung an den Wellendurchmesser verwendet werden, so dass größere Durchmessertoleranzen im Vergleich zum Sitz eines Lagers mit einer zylindrischen Bohrung zulässig sind. Die Hülsen sind als Ergänzung zu Lagern erforderlich, und SKF bietet ein breites Sortiment an Lagerzubehör wie Adapterhülsen, Ausziehhülsen und Kontermuttern. How do I mount a tapered bearing using a withdrawal sleeve? Ermöglicht eine schnelle und einfache Montage auf der WelleCoat both mating surfaces with a thin layer of light oil then push the bearing onto the sleeve. Install the appropriate accessories, fittings and pipes and inject oil until the mating surfaces are separated by a thin film. Open the oil release valve to the pump used for injection and allow the oil to drain for at least 20 minutes.